应用测井资料研究聚合物驱后剩余油分布

大庆油田在聚合物驱后区块仍然有40%以上的剩余储量,准确预测聚驱后剩余油分布是挖潜这部分储量的关键。根据大量代表水驱后期和聚驱后期开发状况的测井资料,计算对比了单井垂向采出程度;通过绘制不同微相剩余油饱和度概率分布曲线和将井点所属饱和度区间标注在沉积微相图上,研究了聚合物驱后平面剩余油分布。结果表明:聚驱后,垂向上驱替趋于均匀,但油层上部剩余油比例较高,在垂向上,厚度小、渗透率低的油层部位,聚驱后剩余油基本没有变化,厚度大的油层部位,聚驱后剩余油剖面趋于均匀,但上部剩余油仍较多;在平面上,河道砂微相聚驱效果明显好于非河道砂微相,剩余油主要分布在相带尖灭、两相分界处以及渗透率变差部位和注采关系不完善的区域。该研究为进一步挖潜这部分剩余油提供了依据。     

耐高温微生物驱油提高低渗透油藏采收率先导性试验

胜利油田东辛高温低渗透油藏含蜡高,常温微生物无法存活,针对这一问题,引进美国NPC公司耐高温菌种,在Y6-16井组开展高温低渗油藏微生物驱油提高采收率研究和现场试验。施工后Y6-16井日增注52m3,表皮系数由施工前的2.069减小为施工后的-6.31,油层污染得到较好改善;原油含蜡量、胶质沥青质含量降低,轻质组分增加,重质组分降低;井组采收率提高5.09个百分点。     

Integrating integer programming and probabilistic deduction graphs for probabilistic reasoning

Optimal solutions of several variants of the probabilistic reasoning problem were found by a new technique that integrates integer programming and probabilistic deduction graphs (PDG). PDGs are extended from deduction graphs of the and-type via normal deduction graphs. The foregoing variants to be solved can involve multiple hypotheses and multiple evidences where the former is given and the latter is unknown and being found or vice versa. The relationship among these hypotheses and evidences with possible intermediaries is represented by a causal graph. The proposed method can handle a large causal graph of any type and find an optimal solution by invoking a linear integer programming package. In addition, formulating the reasoning problem to fit integer programming takes a polynomial time. H.-L. Li was visiting the Department of Computer Sciences, University of North Texas in 1988–1989. He is with the Institute of Information Management, National Chiao Tung University, Hsinchu, Taiwan, R.O.C.     

P油田长4+52小层孔隙度三维模型的建立

为了更准确的评价P油田主要产层长4 52小层的储集能力，以随机模拟建模方法对该层的孔隙度进行研究，建立孔隙度分布三维模型。研究表明，长4 52小层属于低孔储层，平均孔隙度为11．85％。根据P油田储层物性分类原则，该储层在本区分布较为广泛，是今后挖潜的重点。     

A Model for Flooding Prediction in Circular Tubes

Flooding phenomenon limits the stability and the flow of a liquid film falling along the walls of a channel in which a gas is flowing upwards.As known, the entrainment effect can completely prevent the liquid to fall from its natural flow. The present work proposes a new mechanistic model for the prediction of the onset of flooding in vertical and inclined pipes in the presence of obstructions, as well as taking into account the viscosity effect. The good performance of the model in the different geometrical conditions and for variable viscosities of the liquid component assesses the validity of the hypothesis that the instability of a wavelike disturbance limits the countercurrent flow in a channel.     

Structural reliability optimization using an efficient safety index calculation procedure

The objective of this paper is to conduct reliability-based structural optimization in a multidisciplinary environment. An efficient reliability analysis is developed by expanding the limit functions in terms of intermediate design variables. The design constraints are approximated using multivariate splines in searching for the optimum. The reduction in computational cost realized in safety index calculation and optimization are demonstrated through several structural problems. This paper presents safety index computation, analytical sensitivity analysis of reliability constraints and optimization using truss, frame and plate examples.     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。     

二元复合驱阶段见效特征

针对孤东油田油藏条件，通过室内试验研究，确定了以胜利石油磺酸盐为活性剂主剂和聚合物的二元复合驱油体系，通过两者之间的协同效应，增加水驱波及体积和洗油效率。该体系在孤东油田七区西馆上54—61层进行试验，取得了较好的阶段性降水增油效果。本文分析了复合驱见效特征和影响见效因素，为下步跟踪分析调整具有指导意义。     

基于粗糙集的生产环境数据挖掘系统方法

针对粗糙集确定性模型缺乏处理不确定信息的特点，Z．Pawlak等提出了粗糙集的概率模型，但该模型没有包括如何处理生产数据集纷繁复杂数据的方法，因此提出了应用粗糙集于生产环境数据挖掘的一种系统方法，并应用UCI的数据集对该方法进行了检验，实验结果体现了它的性能与有效性。     

吸水膨胀型膨润土/交联聚丙烯酰胺颗粒堵剂

使丙烯酰胺、少量N，N-亚甲基双丙烯酰胺在钙膨润土存在下进行水溶液引发接枝共聚合，聚合产物经造粒、粉碎、筛分，得到粒径0．5～1．0mm的颗粒堵剂。根据颗粒堵剂吸水量大小确定丙烯酰胺与膨润土最佳质量比为7：1，引发剂最佳用量为500g／t，交联剂最佳用量为300g／t，吸水量与这3个参数之间的关系曲线都经过最大值，颗粒堵剂在去离子水中的吸水量为560～650mL/g。该堵剂已大规模生产，在胜利、中原油田许多采油厂已用于调剖、堵水和调驱施工，在青海、江苏、大港、冀东等油田也已开始使用。在胜利东辛采油厂的一个井组，连续3个月在3口井注入该堵剂共27t，使井口压力上升3MPa，产油量大幅度增加。表l参l。